About Bakercranes Ltd

This author has not yet filled in any details.
So far Bakercranes Ltd has created 38 blog entries.

More Radio Controls!

By |2018-10-15T03:04:45+12:00October 15th, 2018|News|

Baker Cranes is proud to introduce the ARC FLEX MINI radio remote as the newest edition to the FLEX range. The Flex MINI is very ergonomic and compact and has fully user configurable. The FLEX MINI also incorporates up to 8 relay outputs and can be configured to suit the needs of most machinery. Our range also includes FLEX EX & FLEX JX Range.

20t/3.2t Double Girder Crane for Steelpipe

By |2018-10-15T03:04:09+12:00October 15th, 2018|News|

Baker Cranes designed, manufactured & commisioned a custom 20t / 3.2t double girder crane for Steelpipe. The crane has a Wheelbase of 7.6m and has custom end carriages & crab frame which houses the 20t Main hoist. See the Videos Section to see the Load testing of the 20t Crane. Crane Commissioned September 2014

Cranes For Nauhria Precast

By |2018-10-15T03:03:54+12:00October 15th, 2018|News|

Nauhria Precast selected Baker Cranes to supply a 20t x 20m Portal Crane for their new Precast Storage Yard. The 20t Portal Crane was designed and manufactured in-house with variable speed drives on both travel directions. Crane Commissioned September 2014. In early 2015 Baker Cranes manufactured, installed & commisioned two more 12.5t Overhead Cranes into

BIG Cranes for Waterview Connection

By |2018-10-15T03:02:23+12:00October 15th, 2018|News|

Baker Cranes was selected to design and build cranes which ranged from 10t to 50t capacity for NZ's largest construction project - Waterview Connection. The cranes were purpose-built to handle each of the 24000 10t segments needed for the twin 2.4 km tunnels. Cranes commissioned between May 2013 & October 2013. Scope of Works: 3

3.2t Cranes for Steel Workshop

By |2018-10-15T02:00:06+12:00October 14th, 2018|News|

Baker Cranes designed, manufactured & commissioned two single girder 3.2t cranes for an established steel fabrication company in Auckland. The cranes are fitted with M7 duty hoists, suitable for continuous 3-shift operation. Cranes commissioned January 2016. Scope of Works: 2 x 3.2t x 15.1m Single Girder Cranes  

4t Cranes & Runways for Building Extension

By |2018-10-15T02:00:28+12:00October 14th, 2018|News|

Baker Cranes designed, manufactured & commissioned six single girder 4t cranes and 400m of Crane Runways for an established glass company for their extension to the Auckland head office. Cranes commissioned April 2016. Scope of Works: 2 x 4t x 21.2m Single Girder Cranes 2 x 4t x 21.7m Single Girder Cranes 2 x 4t

20T Double Girder Crane for Concrete Products Manufacturer

By |2018-10-15T03:21:05+12:00October 14th, 2018|News|

Baker Cranes designed, manufactured & commissioned a double girder 20t crane for an established concrete products manufacturing company in Auckland. Crane commissioned December 2015. Scope of Works: 1 x 20t x 12.8m Double Girder Crane